Goldmann Engineering CC
Fish filleting

Baader 188

Baader 188 picture
2 x In Stock
For sale!
Pictures here

The Baader 188 is the VW Beetle of the fish filleting world.
It is no longer manufactured as new (the updated stainless steel model is the
Baader 588), but the Baader 188 is perfect for small startups
who are just starting with fish filleting.

The Baader 188:

  • is sturdy and durable,
  • has proven itself over decades on board trawlers and in land factories,
  • has high capacity,
  • is easy to operate,
  • is easy to maintain,
  • the drive and operation is simple - making it an economical purchase,
  • is safe to use,
  • and produces a high yield!

Fillets are produced with a smooth clean cut due to the careful handling of the raw material.
All in all: mechanized filleting ensures consistent yield, improved hygiene and safety.


Fillets cut on the Baader 188

Fillets picture

Speed

A Baader 188 has a maximum throughput of 36 fish/min: we recommend 28 fish/min - we have observed that operators can usually only feed fish correctly at 36/min for a limited amount of time and then either start making mistakes or skipping saddles.
At 28 fish/min, operators are better able to feed the machine well, over much longer periods of time.

Fish sizes

Fish sizes that can be cut range from 80 gram (special adaptation) up to 1.2 kg.
Important: In order to achieve high yields, machines are setup to cut smaller ranges
at a time, for example: 120gr to 300gr, or 300gr to 600gr, etc.

Also available:

Baader 188S

This modified machine is capable of processing headed and gutted (h&g) small sized Hake in the range of about 80 grams to 200 grams, fish length 180mm - 280mm. Our unique modification has increased the yield significantly higher than normally achievable when processing small hake using standard 188's.

Contact us!